| Name |
Dissolved Oxygen Monitor |
| Model |
BDO-50D |
| Sensor |
Model : OX-30BY
Cathode : Au
Body : PP
Wetted Material : PP, FEP
DH Influence (100%) : Equivalent -4g/L
CO2 Influence (100%) : Equivalent 15µg/L |
| Flow Cell |
DO-30FC |
| Mearsuring Method |
Membrane Polarographic Cell |
| Measuring Range |
DO : 0.00µg/L - 20.00mg/L
SAT : 0.000 - 200.0% (without analog output)
O2 : 0.000 - 25.00% (without analog output) |
| Repeatability |
Within ±2%FS |
| Response Time (T90) |
Less than 15 sec. |
| Display |
4-digit LCD |
| Analog Output |
4 - 20 mADC (Isolated, Max. Load 650ohm) |
| Power Requirment |
90 - 264VAC 50 / 60Hz |
| Power Comsumption |
Approx. 5W |
| Alarm Output |
Low and High Relay contact, Normal Open
Capacity : 250VAC 3A, 30VDC 3A (Resistive Load) |
| Solution Temperature |
0 - 45°C |
| Temperature Compensation Range |
-1.0 - 50.0°C |
| Operating Enviroment |
-10 - 50, 90%Rh or Less
(no condensation) |
| Flow Rate |
100 - 300mL/min. |
| Calibration |
Zero calibration : Electrical Zero or Zero solution
Span calibration : Atmospere or Air saturated water
Atmospheric pressure : Manual calibration function |
| Instalation Style |
Indoor panel mounting |
| Dimensions |
96(W) x 96(H) x 121(D) mm |
| Panel Cutting Size |
92(W) x 92(H) mm |
| Weight Approx. |
0.5kg |
| Digital Communication |
RS-232C (Optional specification) |
| Standard Accessaries |
Membrane (M-1150T) : 1box (4pcs)
Electrolyte (EL-1150T) : 1btl (50mL) |
Web: